Spider Alert Staff Attack

Versatile and scalable, SpiderAlert ^TM provides real-time emergency signalling and event location for institutional and commercial applications, including healthcare, educational and correctional facilities. SpiderAlert enhances on-site protection, as well as the
personal security of individuals.

The Solution

• Who is carrying the tag/transmitter? (Identifies the person or equipment)
• When did the transmitter last trigger an event?
• Where did the last transmitter event occur?
• What, a unique feature of EIRIS™ enables the system to provide vital status information about tagged entities, such as man down alerts, low battery, tamper and supervision.

RF + IR Transmitter - MCT/IR-201 WP S - A miniature RF+IR transmitter used to send out alert messages that allow the target receiver to accurately determine the specific transmission point in multi-story buildings. RF+IR technology permits a high degree of detection accuracy, Report includes transmitter ID codes and alert code, Unit includes 12V alkaline battery

Man Down Transmitter - MDT-122 S is an emergency transmitter used by security personnel for automatic man-down signalling, in multi-story buildings. The transmitter is designed for correctional facilities, mental health institutions and military bases. Built-in tilt switch activates man-down transmitter, when user is knocked down. Pull cord activates alarm or emergency signal when attempt is made to remove unit from belt, Transmission includes RF and IR, Internal 3.6V lithium battery, Optional tracking signal upon emergency every 30 seconds, Belt clip and nylon holster included

Handheld Transmitter - MCT-101 S (1-channel), MCT-102 S (2-channel) and MCT-104 S (4-channel) are multi-purpose handheld transmitters, designed for multi-function applications, such as arming and disarming the alarm system, switching on lights, opening a garage door or emergency signalling. Superior transmission range, Long battery life, Clips easily to belt or tucked inside a pocket or purse

Pendant Transmitter - MCT-201 WP S (waterproof) is a transmitter designed for emergency and control applications in wireless systems. Transmission is activated by depressing the push-button, Unique code, factory-selected from 16 million combinations, Internal 12V alkaline battery, Supplied with attached chain and key ring

Waterproof Wrist Transmitter - MCT-211 S is a waterproof wrist-worn transmitter designed for personal emergency signalling and other applications where the transmitter needs to be within easy reach at all times. Transmission is initiated by depressing transmitter's push-button, Internal coin-type, 3V lithium battery that can last up to 10 years

Resettable pendant with RF and IR transmitter  - MCT-252 WP S (waterproof) is an RF and IR Resettable transmitter designed for emergency and control applications in wireless systems. Microprocessor-controlled personal transmitter, Two separate pushbuttons for Panic and Assist messages, Dual technology, RF and IR transmission for accurate location identification, Optional message cycling with special escalation feature, Unique factory programmed ID code, Low battery indication and reporting, Supplied with neck chain and key ring, Waterproof for depth of 32 feet/10 meters, Internal 3V lithium battery

2 Input Wireless Transmitter - MCT-100 S is a fully supervised wireless transmitter designed for protecting doors, windows or other objects and for use in a variety of security and control applications., Compatible with virtually any normally open (NO) or normally closed (NC) device connected to its two end-of-line (EOL) protected inputs, Compatible with diverse inputs, including pushbuttons, sensors, contacts, switches and other detection devices

Wireless PIR Detector - MCPIR-2000 is an advanced, fully supervised, wireless PIR detector that incorporates a PowerCode™ transmitter. Internal long-life lithium battery, Auto-disarm after triggering to save battery, Optical coverage 18 x 18 m (60 x 60 ft.), a variety of interchangeable lenses, Programmable pulse counter for maximum false alarm immunity

Wireless Magnetic Contact Transmitter - MCT-302 N S is a fully supervised wireless magnetic contact transmitter designed primarily for protecting doors and windows using a built-in magnetic contact that operates in conjunction with a magnet to detect the opening and closure of a door or window. An auxiliary hardwired input for additional security sensors, Periodic supervision message transmitted automatically

Smoke Detector - MCT-425 S is a fully supervised photoelectric wireless smoke detector fitted with a fully supervised UHF transmitter. It is designed for a wide range of residential and commercial applications where reliable smoke detection is required. Superior detection sensitivity (2.3 ± 1.2%/ft). Sound and transmitted alerts (smoke, tamper, low battery). Long-life 9 Volt alkaline or lithium battery. Simple ceiling-mount installation with no mess.

Wireless Acoustic Detector - The MCT-501 is a fully supervised digital glass-break wireless detector. It is designed for a wide range of residential and commercial applications where reliable glass-break detection is required. Advanced patented acoustic pattern recognition technology that can reliably distinguish between true alarms and false alarms, 360-degree detection range of up to 6m (20 ft), Ability to detect breaking of different types of glass including plate, tampered, laminated and wired glass

Wireless PIR Detector - The Discovery PIR MCW is a fully supervised wireless PIR detector for professional installers and end-users alike, Suitable for residential, commercial and light industrial applications. Fully supervised wireless detector with anti-collision PowerCode™ technology. 3 Volt long life high power standard Lithium battery. Long-term stability and reliability thanks to advanced true digital processing. Ultimate false alarm immunity based on patented True Motion Recognition™ with "Event Verification" algorithm. Sealed optics protects from insects and air currents. Integral swivel bracket for ceiling or wall mounting, simplifies installation and control of the detection pattern. Approved and available in various frequency bands according to international standards. 15mx15m (50ft x 50 ft) high sensitivity coverage.

Wireless Magnet Displacement Detector - SPD-1000 is a fully supervised wireless detector used for protection of paintings, sculptures and other artwork, in museums, galleries, private collections and places of worship. Intelligent detection algorithms, combined with high resolution bi-directional displacement sensitivity, indicate item touching, paint scratching, canvas cutting or removal of the secured item. Automatic transmission of detector's unique ID to the controller when a Touch or Removal alarm is triggered. Location tracking is available in item removal situation

Wireless Spatial Position Detector - SPD-2000 is a fully supervised wireless detector, designed for protection of paintings, sculptures, and other artworks, in museums, churches and galleries, and for protection of valuable paintings at home. When the secured object is moved, the detector transmits an identifiable alarm message. High sensitivity 2-axis acceleration sensor (in a silicone chip), which measures the static (e.g. vibration) and dynamic (e.g. gravity) accelerations, Automatic transmission of Restore message when the object is at rest again, Continuous and automatic supervision and reporting

Wireless Receiver - SR-500 (ER) wireless receiver is an interface unit between wireless transmitters and the SpiderBus. The SR-500 ER has a higher sensitivity receiver that enables longer communication range. Combination of transmitter ID with receiver ID indicates who generated the event and where the event occurred. Continuous supervision for trouble indication, 2 controlled outputs (pulled LOW) by head-end computer, Three inputs for normally-closed sensors, Tamper event reporting

RF & IR Receiver - SR-520 (ER) is a dual technology RF and infrared, microprocessor controlled receiver that receives signals from dual RF/IR transmitters. The SR-520 ER has a higher sensitivity receiver that enables longer communication range. Both technologies enable pinpointing of accurate location of transmitter and create a verified alarm in multi-story buildings, Combination of transmitter ID with receiver ID indicates who generated the event and where the event occurred, Tamper event reporting, Internal RANGE control for sensitivity adjustment, Continuous supervision for trouble indication

Input/Output Interface Units - SI-544 and SI-561 are hardwired I/O units designed to operate via the SpiderBus. SI-544 serves as an interface between 4 End-of-Line input loops and the SpiderBus. It can be remotely controlled via the bus. SI-561 serves as an input for NO or NC sensors and has 1 output circuit that can be remotely controlled via the SpiderBus

2 Way Voice Control Unit - SVC-580R voice control unit suits both for room-call unit and the main nurse station. It has a wireless receiver option for call activation by SpiderAlert transmitters. High voice quality and long-range conversation capacity. Broadcast from main-nurse to all or to a group of units, Requires twisted-pair of wires for half-duplex voice communication in addition to the usual 4 wires of the SpiderBus

Junction Box and Spike Suppressor - SPT-56 is a junction box and spike suppression unit designed to suppress voltage spikes and transients that might endanger the SpiderAlert units connected to the SpiderBus. Six telephone-type RJ-11 sockets, for quick attach/detach of all 6 bus wires at once, Two terminal blocks, allow each wire of the bus to be connected or disconnected separately, Suppress voltage above 39 V ± 10%

Power Supply Unit - PS-2 is a high-efficiency 13.8VDC /1A switching-regulated power supply used for SpiderAlert units. The PS-2 is the only authorized power supply to be used to power SLC-5, SRP-51 and SRP-53R products. Backup battery (if used) constantly charged by the PS-2. Soft start, automatic current limiting and thermal shutdown

SpiderAlert Demo Case - The SDC-1 used for full demonstration of SpiderAlert system applications. It includes most SpiderAlert products. SDC-1P also includes local pager communication elements. Products included: SLC-5 UPS, SR-500, SR-520, PS-2, SI-544, SVC-580R , AV-1, Strobe light, MCT-104 S, MCT 201 WP S, MDT-122 S, MCT/IR-201 WP S, MCT-211, SAM-5. Size: 500 x 350 x 180 mm (19.5 x 13 x 6.75 in.)

Transmitter, Alphanumeric Pager - SL-ANP is a pager for use with SL-PTX paging transmitter, Each alphanumeric pager can be programmed with 2 PIN codes. The pager can be part of group-page, as well as its own individual page. Kit includes rubber antenna, plug-in power supply and RS-232 cable

SpiderAlert Controller - Kit includes rubber antenna, plug-in power supply and RS-232 cable. SLC-5 collects messages and sends commands from and to 255 SpiderBus units. RS-232 interface to the PC, Multi site use with short-haul, fibre optic telephone and wireless modems, Full supervision of SpiderBus units. SLC-5 and power supply unit PS-2 form the SLC-5 UPS unit

SpiderBus Repeater - SRP-51 is a repeater used to extend SpiderBus length. Enables long-distance and free-topology wiring to bus devices. Enables downloading parameters and remote commands. Easy troubleshooting and maintenance. SRP-51 and power supply unit, PS-2, form the SRP-51 UPS unit

Spider Wireless Repeater - SRP-54 R is a wireless repeater, which functions as a wireless link between two SpiderBus sections. It is designed for use in areas where wired installation is either difficult or impossible, or when wired installation is undesirable.