Paging Options
RS232 Interface
Our paging transmitters are configurable to include a serial port which can be used to receive
and relay messages from any device that sends messages in TAP, Visiplex, COMP, Scope or TEKK protocols. MAXPage seamlessly transmits these messages as they arrive.
Personal Computer Interface
Paging systems can be connected to a PC. This will then allow paging in both numeric and alphanumeric formats. The ability to store unlimited pre-programmed messages, automatic diary / scheduling functions to remind personnel about meetings, appointments and duties. These can be programmed weeks or months in advance. It is even possible to send text messages to mobile phones.
Telephone Interface
Where several people may need to contact staff, often the best solution is a telephone interface. Generally, it is as simple as picking up the nearest telephone receiver, dialling the pager extension number and entering the pager number that you wish to call.
Alarm Paging
Paging transmitters can be configured with volt free inputs. This allows anything from doorbells, machinery, building management systems, security systems to automatically call a pager or group of pagers with a specific message.
PageTek2
Scope PagTek2 paging transmitter
A multi-zone programmable on-site paging or telemetry systemScope PageTek paging tranmitter available as 4 and 8 zone models.
The transmitter has fully programmable activation (N/O, N/C or Change of State). It is hardware configurable as either voltage or ‘dry' switched inputs.
Capable of alphanumeric or numeric messaging, or both, all on the same system, PageTek is also available on telemetry frequencies (DIGILINK models) to work with the RX10 fixed telemetry receivers.
Available as mains powered and 12-14VDC input versions, PageTek is capable of ranges of up to a mile with basic antenna shown.UHF POCSAG signalling format ensures excellent propagation even in difficult environments.
An optional serial interface kit (EPTPROG) complete with PC menu driven software gives users the ability to program almost every conceivable system parameter.
With a standby current of less than 300 Micro Amps, this transmitter is ideal for battery operation where required.
Adjustable trigger times, delays, alarm repeats, inter-dependent zone operation and 24 hour zones are all programmable options.
