Spider Alert
Versatile and scalable, SpiderAlert TM provides real-time emergency signalling and event location for institutional and commercial applications, including healthcare, educational and correctional facilities. SpiderAlert enhances on-site protection, as well as the
personal security of individuals.
The Solution
* Who is carrying the tag/transmitter? (Identifies the person or equipment)
* When did the transmitter last trigger an event?
* Where did the last transmitter event occur?
* What, a unique feature of EIRISTM enables the system to provide vital status information about tagged entities, such as man down alerts, low battery, tamper and supervision.
Components
RF + IR Transmitter - MCT/IR-201 WP S - A miniature RF+IR transmitter used to send out alert messages that allow the target receiver to accurately determine the specific transmission point in multi-story buildings. RF+IR technology permits a high degree of detection accuracy, Report includes transmitter ID codes and alert code, Unit includes 12V alkaline battery
Man Down Transmitter - MDT-122 S is an emergency transmitter used by security personnel for automatic man-down signalling, in multi-story buildings. The transmitter is designed for correctional facilities, mental health institutions and military bases. Built-in tilt switch activates man-down transmitter, when user is knocked down. Pull cord activates alarm or emergency signal when attempt is made to remove unit from belt, Transmission includes RF and IR, Internal 3.6V lithium battery, Optional tracking signal upon emergency every 30 seconds, Belt clip and nylon holster included
Handheld Transmitter - MCT-101 S (1-channel), MCT-102 S (2-channel) and MCT-104 S (4-channel) are multi-purpose handheld transmitters, designed for multi-function applications, such as arming and disarming the alarm system, switching on lights, opening a garage door or emergency signalling. Superior transmission range, Long battery life, Clips easily to belt or tucked inside a pocket or purse
Pendant Transmitter - MCT-201 WP S (waterproof) is a transmitter designed for emergency and control applications in wireless systems. Transmission is activated by depressing the push-button, Unique code, factory-selected from 16 million combinations, Internal 12V alkaline battery, Supplied with attached chain and key ring
Wireless Receiver - SR-500 (ER) wireless receiver is an interface unit between wireless transmitters and the SpiderBus. The SR-500 ER has a higher sensitivity receiver that enables longer communication range. Combination of transmitter ID with receiver ID indicates who generated the event and where the event occurred. Continuous supervision for trouble indication, 2 controlled outputs (pulled LOW) by head-end computer, Three inputs for normally-closed sensors, Tamper event reporting
RF & IR Receiver - SR-520 (ER) is a dual technology RF and infrared, microprocessor controlled receiver that receives signals from dual RF/IR transmitters. The SR-520 ER has a higher sensitivity receiver that enables longer communication range. Both technologies enable pinpointing of accurate location of transmitter and create a verified alarm in multi-story buildings, Combination of transmitter ID with receiver ID indicates who generated the event and where the event occurred, Tamper event reporting, Internal RANGE control for sensitivity adjustment, Continuous supervision for trouble indication
Input/Output Interface Units - SI-544 and SI-561 are hardwired I/O units designed to operate via the SpiderBus. SI-544 serves as an interface between 4 End-of-Line input loops and the SpiderBus. It can be remotely controlled via the bus. SI-561 serves as an input for NO or NC sensors and has 1 output circuit that can be remotely controlled via the SpiderBus
SpiderAlert Controller - SLC-5 collects messages and sends commands from and to 255 SpiderBus units. RS-232 interface to the PC, Multi site use with short-haul, fibre optic telephone and wireless modems, Full supervision of SpiderBus units. SLC-5 and power supply unit PS-2 form the SLC-5 UPS unit
SpiderBus Repeater - SRP-51 is a repeater used to extend SpiderBus length. Enables long-distance and free-topology wiring to bus devices. Enables downloading parameters and remote commands. Easy troubleshooting and maintenance. SRP-51 and power supply unit, PS-2, form the SRP-51 UPS unit